what is die casting parts？

A:RFQ receive from customer=> Technical analysis by engineer=>Technical proposal if needed=>Official quotation submitted=>Quotation approval by customer=>Prototype order received=>Prototype fabrication=>Customer validates prototype=>Mass production release.

A:---During processing, Goldconn follow the quality control system strictly as following;IQC for Raw material coming=>FAI approval before mass production=>IPQC process to monitor the process stably and smoothly=>FQC inspection=>OQC inspection before shipment.

A:Yes, Goldconn always provide samples for customer validation before mass production.

A:---2-3weeks for sample. 4-5weeks for mass production.--If any urgent parts, we can provide preferential processing and control the delivery time as you required.

A:Goldconn will response on customer complaints immediately, analysis the process and provide 8D report in 24hours. If needed, Goldconn will provide the replacement accordingly.

Five-axis cnc machining motion simulation check allows users to see the real situation of machine tool motion in actual machining on the screen, and use different machining strategies to compare machining results. The machine tool simulation can issue an alarm to indicate the area outside the machin

There are several ways to divide the CNC machining process?(1) Dividing the process according to the positioning method of parts mounting: the shape of each part is different, and the technical requirements of each surface are also different.

Most of the actual machining errors are caused by the irrational processing technology. In ensuring the basic processing technology (such as "roughness first, then precision, first surface then hole, first large surface, then small surface" or fixture use " Reduce the number of clamping, try to use the combination of fixtures and other basic processing details ", to minimize the processing errors caused by iron filings on aluminum parts, because aluminum parts are very soft, and the excluded iron filings can easily cause processing errors on aluminum parts. . For example, in FANUC or Central China machining centers, use the G83 command to make deep holes as much as possible so that iron filings can be discharged instead of the G73 command.